| ..... |
|
Features:
- Frequency
Range: 0.01Hz~15MHz
- Maximum
Frequency Resolution: 10mHz
- Frequency
Accuracy: 0.02% ±5 Count
- Dual
Display Indicates Frequency & Amplitude
- Built-in 6
Digit Counter with INT/EXT Function up to 150Mhz/High
Resolution
- Output
Waveforms: Sine, Square, Triangle, Ramp, Pulse, AM,
FM, Sweep, Trigger, and Gate or Burst
- VCF for
100:1 EXT Frequency Control
- INT/EXT
Frequency Modulation
- GCV Output
for Synchronization
- Variable
DC Offset Control
- SYNC
Output
- LIN/LOG
Sweep Mode
- Output
Overload Protection
- RS-232
Standard Interface
- Multiple
(8) Channel Outputs
|
| Main |
| Output
Waveforms |
Sine, Square, Triangle,
±Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst |
| Frequency
Range |
10mHz~15MHz in 8
Frequency Ranges (auto-switch) |
| Frequency
Resolution |
15MHz~150kHz (100Hz)
1.5MHz~15kHz (10Hz)
150kHz~1.5kHz (1 Hz)
15kHz~150Hz (0.1Hz)
1.5kHz~15Hz (10MHz)
150Hz~1.5Hz (10mHz)
15Hz~0.15Hz(10mHz)
1.5Hz~0.01Hz (10mHz) |
| Frequency
Accuracy |
0.02% ±5 Count |
| Output
Impedance |
50Ω ±10% |
| Amplitude
Range |
10.00V~0.01V (into 50
ohms) 4 amplitude range;
|Vac peak| + |Vdc| = 5V
Resolution: 10mV (10.00V~0.01V) |
| Amplitude
Accuracy |
≤3% ±5 count at
10Hz~1MHz ≤10% ±5 count at 1MHz~1.5MHz |
| Amplitude
Unit |
Vpp, Vrms,
dBm |
| DC
Offset |
-5V~5V (into 50Ω);
Resolution 10mV |
| DC
Offset Accuracy |
≤3% ±3 count at
Amplitude Min |
| Duty
Control |
80%:20%:80% ~ 1MHz;
Resolution 1% |
| Duty
Accuracy |
≤1% ~ 1MHz at 50%
Duty |
| Display |
Dual Display for
Frequency 6 digits and Amplitude 4 digits |
| Sine
Wave |
| Distortion |
≤0.5%(-46dBc) From
10Hz~150kHz; ≤-30dBc to 15MHz;
(Spec applied from 1Vpp to 10Vpp) |
| Triangle
Wave |
| Linearity
Error |
<1% of full scale
output at 100Hz |
| Square
Wave |
| Asymmetry |
±1% of period + 3ns |
| Rise
or Fall Time |
<18nSec |
| SYNC
Output |
| Impedence |
50Ω ±10% |
| Level |
>1Vp-p
open circuit |
| Modulation
Characteristics |
| Types |
AM, FM, Trigger (int/ext),
Gate or Burst (implement by trigger type) |
| Waveform |
Sine, Square, Triangle,
Ramp, or Variable Symmetry Pulse |
| Rate
Frequency Range |
10mHz~10kHz in 3
frequency ranges (auto switch) |
| Rate
Frequency Accuracy |
±1 Count |
| Rate
Frequency Resolution |
10.0kHz~0.1kHz (100Hz)
99Hz~1Hz (1Hz)
0.99Hz~0.01Hz (0.01Hz) |
| Symmetry |
90%:10%:90%; Resolution
1% |
| Symmetry
Accuracy |
±1 count (≤ ±1%) |
| Output
Level |
≥1Vpp
into 10kΩ load |
| Sine
Wave Distortion |
≤1% from 10Hz to
10kHz |
| Amplitude
Modulation |
| Depth |
0~100% |
| Modulation
Frequency Rate |
0.01Hz~10kHz in 3
frequency range (auto switch) |
| Carries
-3dM Bandwidth |
<100Hz to >MHz |
| External
Sensitivity |
≤ 10Vpp
for 100% modulation |
| Frequency
Modulation |
| Deviation |
0~±15% |
| Modulation
Frequency Rate |
0.01Hz~10kHz(INT)
DC~1MHz(EXT) |
| External
Sensitivity |
≤ 5Vpp
for 15% deviation |
| Sweep
Characteristics |
| Sweep
Range |
15MHz~150kHz
1.5MHz~15kHz
15.0kHz~1.5kHz
15kHz~150Hz
1.5kHz~15Hz
150Hz~1.5Hz
15Hz~0.15Hz
1.5Hz~0.01Hz |
| Width |
≥100:1 (In same
frequency range) |
| Rate |
0.01Hz~10kHz |
| Symmetry
Control |
90:10:90; Resolution: 1% |
| Mode |
Linear/Log Sweep |
| Sweep
Output |
0~≥-5Vp-p
into 10kΩ |
| Trigger
Characteristics |
| Start/Stop
Phase Range |
90°~260° |
| Rate |
0.01Hz~10kHz |
| Frequency
Range |
0.1Hz~1MHz (Useful ~
10MHz) |
| Ext
Trig Frequency Range |
DC ~ 1MHz, TTL
compatible input level |
| Gate
or Burst |
Implement by Trigger
setting |
| VCF
(Voltage Controlled Frequency) |
| Range |
100:1 (0~10V±1V) |
| Input
Linearity |
<0.5% to 1MHz, <5%
to 10MHz |
| Input
Impedance |
10kΩ |
| GVC
Output (Generator Controlled Voltage) |
| |
To set the voltage
between 0.2v to 2v as per different frequency in same
frequency range |
| Frequency
Counter |
| INT/EXT |
Switch Selector |
| Range |
5Hz~150MHz EXT |
| Accuracy |
Timebase Accuracy ±1
count |
| Time
Base |
±20ppm(23°±5°C)
after 30 minutes warm up |
| Resolution |
The maximum resolution
is 100nHz for 1Hz and 1Hz for 100MHz |
| Input
Impedance |
1MΩ//150pF |
| Sensitivity |
≤35mVrms(5~100MHz);
≤45mVrms(100MHz~150MHz)
|
|
|
