|
1. Tell me about your generators For home use, we have an advanced generator (CS1-12) for 12 different metals, CS1-2 for colloidal Silver and Gold only and CS1-1 for Silver only. All can make at least 1 to 4 litres in each batch. Our CS1-12 can be programmed by the user using a front panel rotary selector switch to make colloids of 12 different metals each of which has unique benefits as Silver, Gold, Platinum, Zinc, Copper, Magnesium, Tin, Iron, Titanium, Rhodium, Iridium, Chromium (or Boron or Selenium). All of our generators have 4 essential features to ensure a quality equivalent to or surpassing mesocolloids:
They use two substantial solid sheet metal electrodes of 99.99% purity (0.9999). For users with limited budgets, only one Gold, Titanium or Platinum electrode is needed, but for highest quality, two similar electrodes are recommended. Pulsed high frequency waveform is a valuable option by helping to ensure smallest particle size less than 10 nano-metres (100 Angstroms) , as evidenced by independent analysis of our water at www.biophysica.com/analysis.htm For industrial use and large volumes we
offer two industrial generators the VAT-1 for 10 litre volumes and the ONLINE-1
for thousands of litres. 2. What distinguishes your generators above others ?
2. Our electrodes are large area solid sheet medical quality 0.9999 pure metal, rather than thin wires. Not only will they last longer, they provide a lower, level of electric current density per square centimetre, thus producing smaller mono and di-atomic clusters, rather than ions which become ineffective in the human body. 3. Full kit of accessories ready for home use. 4. Powered by 24v or 48 v wall adapter power supply, from 110 to 230 volts, 50 or 60 Hertz. or from battery or Solar Panel. 5. Our CS1-12 generator has Constant Current control, motor driven magnetized stirrer, high frequency pulses, alternating polarity, zapper output, choice of 12 different constant current user-programmable levels for 12 different metals and option of voltage output to monitor water conductivity as an approximate measure of ppm . 3. Why use alternating polarity current ? Alternating polarity switching is a self-cleaning function and ensures that each electrode is alternately positive (anode) then negative (cathode) approximately every few minutes. This ensures equal, balanced wear on each electrode with less formation of oxide deposits or of acid and alkaline ions. Each polarity of current is controlled by our Constant Current circuit. It is only when the electrodes are different, such as one silver and one gold, that Alternating Polarity switch is turned OFF and the Gold or Platinum electrode is placed into the red (Anode) outlet. Research in our laboratory has demonstrated that gentle stirring of the water is essential to prevent accumulation of acid and alkali (electrolytic breakdown of water) at each electrode which causes excessive ion formation, more rapid wear on the electrodes and less charge on silver particles, thus reducing Zeta Potential. Other generators use heating, bubbling or cavitation of air to create agitation. We do not recommend this exposure to Oxygen and CO2 because of possible oxidation, tarnishing and charge neutralization of the highly active nanometer particles. We also recommend to ensure that your distilled water is not Oxygen, Peroxide, or Ozone enriched. Try to avoid exposure to light both during the charging process and later. This because the electronic charge attached to the Silver atoms could become neutralized by light. Each stirrer can be loaded with 1 or 2 powerful Neodymium magnets for water magnetization look at http://www.web-hang.hu/sylmagnetism/leiras.htm To see a picture of our stirrer. 5. Why use constant current control? Constant Current is a unique, specific term in Electronics. It is based on Ohm's Law and means "unchanged notwithstanding variations of applied voltage or electrical load (conductivity of the water)". This avoids possible runaway conditions as the water becomes more conductive. With Constant Current Control you can program, set, control, alternate or slowly change the current to be at any level you choose and it will not increase above that level no matter how conductive the water becomes. Our Alternating Polarity is also Constant Current controlled.Most generators on the market use Constant Voltage (such as a directly from a battery or wall adapter). This is likely because Constant Current is not easy to implement, requires an automatic feedback control circuit such as invented by our scientific staff (similar to 'Cruise Control' in an automobile). With Constant Voltage on the other hand, Ohm's Law (Current equals Voltage multiplied by Conductivity) implies that the current flowing through the water will vary wildly according to the conductivity of the water or applied voltage. Constant Current feedback control ensures that the current flowing will not change from whichever of the 12 programmed levels set by the control knob, such as 5 milliamperes (ma), regardless of the quality of the water. We have used our generator successfully with tap, well, aquarium, swimming pool and even sea water, although we recommend good quality distilled water. It is current (not voltage) which does the work of releasing/etching metal atoms from the surface of the Anode (+) electrode according to the current density (ma per square cm). This is why it is also important to use as large surface area electrodes as possible to keep the current density to a minimum, rather than using thin wires or rods. With overdriven wires you often see wisps of smoke which indicates particles of around 1000 nanometers (1 micron) instead of the desired 1 to 20 nanometers which are invisible, colorless, and too small to give a positive Tyndall test with a light or laser beam. Our particles recently were measured to be 1 - 8 nanometres (10 to 80 Angstroms) and can be classed as true mesocolloids. Pulsed high frequency waveforms are known as 'Pulsed Electro-Deposition" in the high quality electroplating industry to provide smaller smoother nanometre particles and crystals than is possible with unpulsed DC. The frequencies and abrupt sharp edges of our pulse waveform seem to facilitate detachment and separation of atoms before they can agglomerate into larger clusters. Pulse width and frequency have been carefully chosen to match each metal and our requirements to produce the best colloidal waters of small nanometre size to be most active against small viruses and prions and equivalent to mesocolloids. Independent lab analysis confirms this. High
frequency Pulses with slow frequency modulation is standard on each channel for making a
higher quality smaller particle colloid of less than 8 nanometres. Alternating
Polarity (self-cleaning) is still a separate option because when making gold
with only one electrode, you would switch
off the alternation. Regardless of mode, the charging is always by
Constant Current in order to prevent over-current runaway when the water becomes
highly conductive. The pulser is
not to make stronger ppm but higher quality approaching atomic dimensions for Quantum
and
Superatom
effects and psycho-spiritual benefits and to combat prions. With the Pulser
ON, it is possible to get strong solutions but you need two to four times the length of
time because the pulses are ON only for a fraction of the time (Duty Cycle). For
serious conditions, such as neurological disorders likely due to small unknown
viruses and prions, the Pulser is a definite
advantage by producing smallest silver particles which can cross the blood-brain
barrier. With Silver, Zinc and Copper, the pulser should be ON for 24 to 48
hours and the measurements of ppm are closely similar.
When making colloidal Gold, turn the control knob up to a higher current level
and charge for 5 -10 days at least. The Pulse mode enables smaller particles to be produced and is
proprietary refinement invented by Biophysica. There is a price to pay in that during the Pulse mode the
electrical current is ON only for a fraction (30 - 50%) of the time because with
pulses the current flows only when the pulses are ON and not when they are off.
This means that there is less total energy to move metal atoms off the electrode
surface, however those atoms which do come off are of a much higher quality and
smaller (less than 8 nm) and likely more effective against small vicious viruses like Mad Cow
entity called a Prion.
8. Is concentration important? In Vitro studies with bacteria have demonstrated that 5 parts per million of Silver is the optimum local concentration needed to kill bacteria. In order to obtain this level in the body after dilution with the 10 litres of body fluid, the ingested water should optimally have a much higher concentration of at least 20 ppm. Recall that particle size is a more important parameter in establishing quality. 20 parts per million is 20 mg per litre or 20 microgram per ml. One half ounce of 20 ppm (15 ml) would contain 300 micrograms (0.3 mg) which is the recommended daily intake of Silver. For Zinc, the recommended daily intake is 30 milligrams. 9. How is concentration measured? There is no easy and accurate way of measuring Silver Ion and Particle concentration. Measuring ppm in water is a very inaccurate art and is usually done crudely by measuring electrical conductivity, such as with the Hanna Water Meter available at http://www.biophysica.com/conductivity.htm Some experts consider that Electrical Conductivity or TDS (Total Dissolved Solid) using a Water Meter is an approximate measure of ppm. Our analysis revealed that 38 micro-Siemens corresponded with 24 ppm. During the charging process Conductivity rises from and initial level of 0 or 1 micro-Siemens and after 48 hours rises up to 20-50 micro-Siemens. The other subjective way to check is to taste the bitter taste at the back of the mouth to make sure that there is a minimum concentration. A concentration of 5 ppm seems hardly sufficient to combat serious infections because with dilution of the 10 litres of body fluid, concentration in the tissues and blood may become reduced to ineffective levels. The only problem with CS is not taking enough. Even among experts there is confusion about ppm and how much is Ionic and how much particulate (colloidal) and how conductivity meters and analytical laboratories reflect these measurements. For example it is possible to obtain an electrical conductivity reading of 60 microSiemens and for the lab to say that it is only 35 ppm, when another lab will report that it is 72 ppm or 1.2 times the conductivity reading (the figure of 1.2 is more likely to be accurate). Regarding the water test meter, it measures only electrical resistance of the water which is only an indirect measure of ions and atoms in the water and is the best method conveniently available. Also nanoparticles can have a positive or a negative charge. With distilled water the measurement usually commences at zero or 1 and it rises to about 20-50 units after 48 hours with Silver. An accurate measure of parts per million can only be done by sending a sample of the water to a special analytical laboratory, which we have done several times and correlated the ppm result with conductivity. Final concentration is proportional to the volume of water, electrode area, amount of time and current level in milliamperes during the charging process. Too much current density (ma per square cm) damages the electrode surface, damages and breaks down the water (electrolysis), produces undesirable ions and large ineffective particles which can cause Argyria (a harmless skin discoloration). We also supply a unique color indicator PPM Powder for silver which we have discovered. Our scientists have developed a more direct method of measuring Electron Energy Content using an oxidation indicator which changes color in the presence of active electrons, then accurately quantifying with our electronic colorimeter. Conductivity testing is done by immersing the end of the Conductivity Meter into the water and reading the display on the meter. Most users test the quality of their Distilled Water first and often find that there is considerable differences between suppliers. Many distilled waters have added Ozone which could theoretically contribute to undesirable Oxide formation. 10. What is the importance of particle size? Size is the most important of properties affecting quality. Studies have shown that the optimum size is related to the microbe or Prion to be inactivated and that clusters of silver atoms over 20 nanometres (200 Angstroms) in diameter are much less effective (1 nanometre = 1/1000 micron = 1 millionth of a millimetre). Therefore it seems prudent to provide in the water a range of size from the smallest mono-atomic to the largest of 20 nm. It is in this range of nanometre dimension that the bizarre effects of Quantum Physics (tunneling, non-locality, interconnectedness, action-at-a-distance, tachyonics, superatom, interaction with Consciousness) begin to operate. It is a major thrust of our research program to provide a quantum fluid with particles less than 10 nm. For interaction with Consciousness look at "Vibrational Medicine, chapter 8 by Dr Richard Gerber on the work of Dr Bernard Grad at McGill University where 2 samples of water picked up positive energies of the healer Oscar Estebany or negative energies of depressed patients. Also the ice work of Emoto at www.masaru-emoto.net Since particle size is related to current, we program our generators to provide a slowly ramping current commencing at the microampere level. This current control is maintained even when using impure conductive water. With Silver, Copper and Zinc, we advise not heating the water or adding salt, both of which make it excessively electrically conductive. Distilled water is generally conductive enough to begin the delicate process which should not be rushed. Also our use of 48 volts now increases our control over current for Gold, Titanium and Platinum. Since each cluster or atom can carry one unit of electrical charge, then it follows that smaller particles will result in a much more electrically active product. It may be that much of the efficacy against microbes is due to the electrical charge, while the silver may be merely a catalytic carrier of charge. This is why measuring Electron Energy Content could become as important as Zeta Potential and ppm. 11. Does my CS need to be protected from light and other influences? Most people and some experts dont bother to protect their CS water from light for the 2 days of charging or afterwards. We have found no measurable changes or deterioration to our colloidal waters even after many months of exposure to light, however we recommend that you avoid exposure to light, strong electro-magnetic fields and to individuals harbouring negative thoughts or suffering from an emotional disorder (ref Consciousness research of Drs Emoto and Dr Bernard Grad at McGill university mentioned above). Differences in concentration and colour of the water are thought to be due to different quality of the sources, temperature and most probably quantum effects, since we are making quantum-sized particles less than 20 nanometres. 12. Why do the electrodes become covered with a fine deposit after 12 hours of charging? Usually after 12 or more hours oxide particles and atoms of Silver agglomerate together on the electrodes and float on top of the water and sink to the bottom. You dont have to stop at that point. These can be easily filtered out later with a coffee or laboratory filter leaving absolutely clear water which you can drink. After filtering, our concentrated CS water is still clear even after 48 hours of charging. This is due to our use of 6 important factors: alternating polarity, high frequency pulse waveform, constant current charging, extra large electrodes, magnetization and motorized stirring. 13. Is it OK to use one of those green scouring pads to clean the electrodes? After each session, clean the electrodes with fine steel wool to obtain a shiny surface. Green scouring pads and some steel wool pads often have soap or other chemicals which is bad for the silver. 14. What size and kind of containers do I need to make CS? Using a bigger container (2 or more litres) means more water to be charged with ions and particles and necessitates a longer time such as 48 hours to obtain 20 - 50 ppm. There is no limit on how large a container, but one would be better to use larger electrode area such as 6" x 6" to compensate, otherwise the ppm will be very low, such as 1 - 5 ppm. With small to medium sized electrodes it is unwise to use more than 2 litres. Fish bowls (2-4 litres) make excellent containers for charging water and are available at pet stores. Walmart sells 2 and 4 litre cracker/cookie jars of various sizes (made by Anchor Hocking) which we can sell to you. Remember to do the charging in a dark area away from noxious energies.15. What ppm of Silver can I expect? With Silver, the largest reasonable ppm and still have a stable product is about 50 ppm over 48 to72 hours otherwise the particles begin to attach to each other giving a yellow colour or cloudiness. In our opinion, colour in any colloid represents large particle size. Continuing longer would not add too much. Silver, Zinc and Copper are very similar in their atomic characteristics. The best ppm is to have at least 10 ppm up to 30 ppm. Obviously you would need less of the stronger more concentrated version to get the same benefits. You can get some imprecise indication of strength by tasting the water or by electrical conductivity or by our PPM colour indicator powder. Normally we recommend 48 hours for 30 ppm. The current in our generators is controlled to be very low at first so as to ensure the smallest nanometre sized particles (1 - 8 nm) rather than ions. To maintain the high ppm after making, protect the water from light and electro-magnetic fields, especially during the manufacturing charging phase. We can supply brown or blue glass or plastic bottles16. What ppm of Gold can I expect? Gold is a noble metal because it does not naturally corrode or tarnish. Gold atoms are released from the Anode electrode only when the electrical current is at a high level and when the water is already made conductive (seeding) by Silver or other ions and atoms. In making Colloidal Gold you have to start with some conductivity in the water (called “seeding”) for substantial electrical current to flow and this is best done by adding some Colloidal silver water to your new batch of distilled water or better to simply make CS first then change the electrode on the red outlet (Anode, Positive Polarity) turn the Alternating option OFF so that only Gold is being released from the red electrode. Colloidal Silver and Gold make an ideal combination which the ancient alchemists called "Electrum" with synergistic metaphysical properties superior to either alone. Since Gold atoms do not easily come off the electrode, the ppm is lower and the electrode will last for years. After 2 days, Gold will be only about 0.5-1 ppm because gold does not come off easily from the electrodes. A longer charging time of 1 to 2 weeks is needed. Even with Gold, the electrodes should not be overdriven by excessive current. 17. What size of electrodes do I need?Decide about size of electrodes you need to fit your container and which metals. The larger area the better. 2" x 6" (5cm x 15cm) is a popular size. Look at http://www.biophysica.com/colloidal_generator.html 18. What thicknesses are available? We generally order Silver in a thickness of 0.51 mm (0.02 inches, or 24 gauge) and Gold in 0.32 mm (0.013 inch or 28 gauge). Gold is thinner since it does not wear down so fast and area is the most important dimension. Other thicknesses are available on special order. For highest quality, we recommend the largest surface area possible (2" x 6" is a good and popular size). Thickness is important only for longevity of the electrode and not for quality of the product. 19. What are the best dimensions for electrodes and containers? With our new 1” (2.5 cm) insulated stalk design option, electrodes can extend deeper into the water for fuller immersion. To keep area constant, this requires us to make the electrode wider so as not to be too long for the average 1 or 2 litre container, ideally a fish bowl with a flat wall. We can supply you with glass jars for this purpose. We have found that for colloidal waters of Silver, Copper or Zinc a four litre glass coffee container or fish bowl is ideal. They generally have a 4" (10 cm) diameter mouth and a depth of 6 " (15 cm). With electrodes separated by 2.5 " (6.4 cm), maximum electrode width is 2.5" (6.4 cm). Consequently our ideal and most popular electrode size is 2" x 6". 20. How are the electrodes mounted? We generally attach a 1" stalk and gold-plated PIN plug (not Banana) on each electrode to fit our generators but can make any attachment you would like. If the electrodes are longer than 6 inches and are to hang down, then they will need a double stalk to prevent electrodes from rotating and flapping around. We can provide a separate insulated plate with a small 12 volt motor and stirrer on which to attach the electrodes. Look at http://www.biophysica.com/stirrers.htm for a picture 21.
How can I test my generator to make sure it is working properly? If the lights of the generator do not come on, then there may not be power coming in to the wall adapter. We now have incorporated an electrode indicator which lights up whenever current more than 10 milliamps is flowing through the electrodes. Due to our constant current feature, you can safely short the two electrodes to each other to make sure that this light comes on and that current is flowing. You will usually see some slight oxide deposit on the electrodes or on bottom of container after a few hours of charging, even using the alternating polarity (self-cleaning) mode. One way of testing the generator for proper electrical output is to buy a cheap multi-voltmeter from Radio Shack and use it to measure that the voltage between the two electrodes is 24 or 48 volts. Then switch the meter to current reading of 200 mA DC and test each switch setting to verify the current flowing between the two electrodes. Alternatively, buy a very small 12 volt automobile light bulb and connect it across the electrodes and turn the switch to higher levels and the bulb should light at about 50 milliamps. When you taste the water after 24 hours, there will be a recognizable metallic taste. 22. What is your best generator?For industrial use we make powerful in-line generators such as for swimming pools and cooling towers. For home and small commercial use, the CS5-12 is our most advanced and versatile professional generator for making large volumes up to 25 gallons at a time. It comes with a digital current meter and 5 simultaneous, separate channels, each capable of electrolysing 12 different metals. It can have 5 motorized stirrer plates each with a 9 feet (3 metres) long cable, which plug into the generator. Alternating Polarity is available or can be switched OFF on each channel for making single metal colloidals, such as Colloidal Gold. The digital meter indicates the precise amount of current in milliamperes flowing through the water at any instant. During the charging process, current will rise because the water is becoming more electrically conductive as more metal atoms are released into the water. The meter and electrode light also serve the purpose of reassuring the user that the generator is working. 23. How does the Zapper and skin electrodes work? The zapper output is a pulsating energy waveform having both pulse-width and frequency modulation. Frequency is swept slowly up and down within the range best suited to restructure and to energize water. The zapper output is available from the pulsing option and applied to the body using skin or hand-held electrodes or on acupuncture needles. It is reported by Dr Clark to be beneficial in treating miasmic parasites. For Zapper links. 24. GOLD: I noticed that your quote included two each of the various electrodes, except for the gold. Are two gold electrodes required ? In order to reduce your costs, we have designed the CS1-12 so that two expensive gold electrodes are not necessary, although two should ideally be used. When making Gold or other highly noble and expensive metals, like Titanium, Platinum, the CS1-12 is designed so that you need only one of these electrodes rather than incurring the cost of two. This is because due the physics of Electrolysis and Electron flow, only one electrode releases atoms at any instant. This electrode is the positive electrode (Anode) while the other electrode acts only as a ground (Cathode) and does not release atoms into the water, and in fact receives atoms. In order to make Colloidal Gold with one gold electrode, you would switch the Alternating option OFF, so that the Gold electrode remains the Anode all during the charging process, and a silver or any other electrode is used as the Cathode. For making Silver, Zinc, Copper with 2 similar electrodes, you should use the Alternating option so that each electrode is Anode for a few minutes, then the other electrode becomes Anode for a few minutes, then they automatically switch again repetitively. This prevents build-up of silver, zinc and copper oxides on the surface of the Anode and has a self-cleaning action. If you buy a single gold electrode, you can use a silver electrode as the cathode to balance it in the unipolar mode. The results are quite good but less perfect than using two same electrodes Gold needs the full power of the 48 volt power supply, which the lower metals do not. With regard to the noble metals Gold, Platinum and Titanium, these atoms are more difficult to remove from the electrode and require more time, more electrical current, higher voltage and require our bio-compatible seeding catalytic agent (ORMUS-1) to produce the desired results. For a description of ORMUS look at http://www.subtleenergies.com/ormus/whatisit.htm 25. Can I control the stirrer motor speed? The knob at the bottom left corner is for motor speed. Keep it low so as to avoid excessive vibration, especially if you are using a magnet-loaded stirrer.26. Anomalous Conductivity Readings: Readings rise then fall then rise again. This kind of anomaly has been noted by others and by ourselves. We intend to look into this more scientifically but our theory is that there are two entities in the water, each of opposite charge. Metal ions are positive (Cations) and particles may be positive or negatively charged and the resulting conductivity depends on which of the two prevails in order to conduct externally applied electrons from the conductivity meter so as to give a current reading on the meter (by Ohm's Law). This of course may explain why conductivity and TDS measurements can be so notoriously inaccurate in representing ppm. It could be a good sign that conductivity drops and may be due to a greater preponderance of particles over ions. It could be that conductivity meters, by being based on Ohm's Law and the flow of negative entities (electrons) may be giving misleading measurements. We have observed that driving large electrical current through thin wires results in a much higher current density (mA per sq cm) than when using large sheet electrodes which are likely to provide more high quality nano-atomic particles than ions. According to Quantum theory, Nano-particles because of their boundary insulating layer which preserves charge, mutual repulsion and Brownian Movement, have more Quantum Healing Effects than ions which form a soluble combination with water, chloride and other radicals and have no distinct boundary layer. 27. What electrodes are available? Currently we can obtain only the following metals with the necessary 99.99% purity Silver, Gold, Copper, Zinc, Magnesium, Iron, Titanium, Tin, Platinum. All of our electrodes are of 99.99% purity. Magnesium electrodes are oxidized rapidly and should be carefully monitored and time limited. 28. Can I make the charging process faster? The reason that 48 hours is the optimum time is that we are producing a range of the highest quality smallest nanometre and atomic sized particles, from less than 1 up to 8 nanometres. This can be best done by automatically controlling and programming the electrical current so that the water is charged slowly and carefully, just like "trickle-charging" of an automobile battery over many hours, rather than in one hour (Boost Charge). We cannot push the water or the electrodes (boost-charge) without compromising quality. Parts per million (ppm) is directly related to electrical current in milliamperes, electrode area, to time, and inversely to volume of water . We have found that a four litre container of distilled water can be charged with Silver, Copper or Zinc for 48 hours and produce 24 to 40 ppm with the high quality reported in the analytic results seen at http://www.biophysica.com/analysis.htm With regard to the noble metals Gold, Platinum and Titanium, these atoms are more difficult to remove from the electrode and require more time, more electrical current, higher voltage and require our bio-compatible seeding catalytic agent to produce the desired results. A: In order to produce the best mono-atomic CS and C Gold, we are continually improving our technology based on our ongoing research programme. We have now doubled the voltage for making CG to 48 volts. This will allow for more gold atoms to be removed from the electrode. Gold does not come off easily, even with very high voltages and spark gaps used by other manufacturers. We want nanometre sized particles rather than large particles over 200 nanometres which are less biologically effective even though it may give beautiful pink colours. Our Silver, Gold, Zinc, Copper etc particles are less than 10 nanometres, they are invisible and do not give a Tyndall test response, since they are smaller than the wavelength of light. Excessive electrical current gives excessively large particles. Recent lab tests indicate that using our pulse option for 48 hours makes the smallest particles of Gold, with low concentration of 0.5 ppm. Higher ppm could be obtained with longer time, by turning off the pulses and by raising current but at the cost of larger particles. Quality is more important than quantity. 30. What is the approximate gallons of CS that can be made per set of electrodes? Q: Can you mail to Europe? A: Mailing to Europe costs $30 US and is insured with a tracking number. We ship
successfully to Spain, Australia, Philipinnes, Pakistan, United Arab Emirates etc. 32. How do you justify your prices? The electrodes are solid large area 99.99% medically pure metal which are time consuming to cut and attach to Gold plated pins. Also we have just brought down the price of our generators which are also very labour intensive and time consuming to make. Etching each Miasm and Sacred Geometry protected Printed Circuit Board alone takes 40 minutes. We have to etch them individually ourselves and it cannot be done commercially by a computerized production-line manufacturer because of the unique Sacred Geometry graphics and Chartres Labyrinth pattern on the board.Warranty is 5 years for any faults or dysfunctions of our causing. Electrodes will become consumed with use and are not covered by warranty. For returns and more details, look at http://www.biophysica.com/warranty.htm 34. How do I order?To order, decide what electrode sizes you would like depending on the volumes you will bge producing. All of our generators now have motorised stirrer, Alternating Polarity, Constant Current and Pulsation as essential standards. To
order simply let us know by e-mail or by phone and we will let you know shipping
charges depending on where you live, then you could pay by www.paypal.com
which is owned by E-bay. They will accept credit cards.
Generally we e-mail an invoice to you from our paypal avccount. Prices are in US dollars. Alternatively pay by bank draft or certified cheque. If you order let us know your phone number, since e-mails are sometimes unreliable. 34. Disclaimer: The information conveyed here is based on records and research for your information which is for horticultural, educational, sacramental and research purposes only. No statement should be taken as medical advice. It is not claimed or implied here that Mono-atomic SILVER-MAX or Colloidal Silver will cure any disease. Links: Interesting Question & Answers from another company at http://www.silver-colloids.com/Papers/FAQ.html and at http://www.silver-colloids.com/Reports/reports.html We disagree about small particle size and colour and that all clear liquids are ionic. Our CS has been measured to range from 1 to 8 nanometres and is a clear liquid at 24 ppm. Small nano-particles (silver or gold) cannot filter, alter or change the colour of light which ranges from a wavelength of 300 to 900 nanometres. Looking at the other company's report above, the range of particle size indicates a preponderance of large particles and none under 20 nm. |
|||
|
|||