We recommend this meter for low price and versatility. Part BF26
Useful to measure frequency, pulse rate, current and voltage on our generators.
Rugged pocket design, 11 functions including Temperature, Capacitance, and Frequency
- 4000 counts on large LCD
- Autoranging with manual range override
- Relative zero, Data Hold, Range Hold, Auto Power Off
- CAT II-600V, CE & UL Listed
- Powered by two 1.5v AAA batteries
- Weight 260gm (9.17 oz)
Measurement ranges (full scale):
- Voltage from 400mV to 600V AC or DC
- Current from 400uA to 10A AC or DC
- Resistance from 400 ohms to 40 Megohms
- Capacitance from 0.004 to 200uF
- Frequency from 10 Hz to 10 MHz
- Temperature from 0 to 1400 F (0 to 760C)
- Duty Cycle from 0.1% to 99.9%
- Continuity below 30 ohms
- Diode Test using 0.3mA at 1.5 volts
Price: $100 US
| This little digital meter will measure the actual current flowing through the electrodes using the current output connectors on our generators. By Ohm's Law, Current is directly proportional to Conductivity. Turn meter to 200 mv position and meter will read 1 millivolt per milliamp of electrode current. |
- DC-A: 0-200ľA-2000ľA-20mA-200mA
- Resistance: 0-200-2000-20K-200K-2000K ohm
- DC-V: 0-200mV-2000mV-20V-200V-1000V
- AC-V: 0-200-750V
Price: $30 US