Tanks for commercial batch production

Straight walls readily accommodate supports, make full use of space. Internal flange assures maximum strength. Withstands constant operating temp. to 140°F.; intermittent service to 160°F. Wide range of sizes to meet many processing applications in manufacturing and research. Smaller sizes are excellent for table top operations, such as photographic processing, etching printed circuits, and treating small parts. It is recommended that all tanks having vertical dimensions greater than 18” or at elevated temperatures have simple bracing of angle iron or 2 x 4’s plus plywood for full side support. Translucent; you can see the liquid level. U.V. Stabilized. Not for fuels or oils. Medium density polyethylene. Covers are loose fitting without gasket. All dimensions are approximate

We usually install a tap at the bottom of the tank for draining.

We usually install a immersible 12 volt pump at the bottom of the tank for circulation and mixing

Lid can hold multiple large area electrodes hanging down into the water

For industrial in-line closed pressurised systems look at our in-line systems with 3" diameter pipes

Permits safe, quick pipe connections to plastic-metal or plastic lined tanks. Fittings have exceptionally heavy buttress threads. Designed to prevent any possible leakage due to poor thread engagement. Hex shaped body and nut for easy installation. Working temp. of PVC is 40° to 140°F.,  NSF listed.

1/2", 3/4", 1", 1 1/4, 1 1/2, 2" , 3" diameters