BIOPHYSICA INCORPORATED  --  Water Treatment Specialists since 1998

--   Colloidal Mineral Water Generators   --   Disinfection Water Ionizers   --   Water Descalers and Softeners   --

 
Featured Products About Biophysica Water Science Microbiology and Infection Information Warranty, Returns and Repairs Billing and Payment Terms
 

Phone: 289-389-9773   or   Toll Free 1-800-488-2032 from Canada, US and Territories -or- E-mail: info@biophysica.com

 
General Background Biophysical Properties of Metals Reverse Osmosis pH, Alkalinity, Hardness Safety, Toxicity Salt Water Swimming Pools Structured and Special Waters Ultra Violet Water Treatment

Reverse Osmosis

Osmosis is the process of water passing through a semi permeable membrane in order to balance the concentration of contaminants on each side of the membrane.  A semi permeable membrane is a barrier that will pass some particles like clean drinking water, but not other particles like arsenic and lead.

Reverse osmosis uses a semi permeable membrane; however, by applying pressure across the membrane, it concentrates contaminants (like a strainer) on one side of the membrane, producing clean safe water on the other.  This is why RO systems produce both clean drinking water and waste water that is flushed from the system.
 
Advantages:
 
Reverse osmosis can remove dissolved minerals that cause hardness, toxic chemicals and other impurities. It can improve the taste of your water, plus treated water will not produce a mineral build-up in kettles and coffee makers.  Reverse Osmosis units may remove contaminants such as:
  • Arsenic
  • Barium
  • Cadmium
  • chromium
  • Copper
  • Cryptosporidium
  • Entamoeba
  • Fluoride
  • Giardia
  • Hexavalent Chromium
  • Lead
  • mercury Perchlorate
  • nitrates
  • Radium 226/228
  • Selenium
  • TDS (Total Dissolved Solids)
  • Trivalent Chromium
  • Toxoplasma
  • Turbidity
 
Disadvantages:
 
  • May allow a few microbes to slip through
  • Removes beneficial elements such as fluoride, magnesium, zinc, calcium, silica which should be added back
  • Produces waste water from Impurities That Were In The Water. 
    They are washed down the drain. As the source water flows through the module, it is divided into two streams. One stream is forced through the membrane by osmotic pressure created due to the water pressure on each side of the semi-permeable membrane. The second stream carries the rejected salts, dissolved pollutants and contaminates to the drain.

 
Home Page  |  Privacy Policy  |  Terms of Use  |  Contact Us  |  Send this Page to a Friend
Copyright 1999-2011 -- All rights reserved
www.biophysica.com